获取参与流程
招标公告
第五章投标邀请
Section5．Invitation for Bids
项目名称：浙江LNG三期项目接收站工程
Project Name: ZHEJIANG LNG Phase III Project Terminal Project.
货物名称: 低温轴流式止回阀
Name of Goods: Cryogenic Axial Flow Check Valve
招标编号（Bid No.）：0704-2340JDCP2174
1.中化建国际招标有限责任公司（以下称为“招标代理机构”）受中海油石化工程有限公司（以下称为“招标人”）委托，就中海油石化工程有限公司浙江LNG三期项目接收站工程所需部分货物及相关服务进行国际公开招标。现邀请投标人对下列货物和服务提交密封投标：
CNCCC International Tendering Co., Ltd. (hereinafter referred to as “the Tendering Agent”), entrusted by CNOOC Petrochemical Engingeer Co.,Ltd (hereinafter referred to as “Tenderee” ), intends to purchase the Goods and the relevant services required under ZHEJIANG LNG Phase III Project Terminal Project of CNOOC Petrochemical Engingeer Co.,Ltd by International Competitive Bidding. The Bidders are kindly requested to provide the following Goods and services with sealed bids.
货物名称：低温轴流式止回阀
Nameof Goods: Cryogenic Axial Flow Check Valve.
数量：17台
Quantity:17 sets
规格：1台20"-CL300、6台14"-CL1500、6台10"-CL1500、1台4"-CL1500、2台16"-CL300、1台3"-CL900。
Specification: 1set 20"-CL300、6 sets 14"-CL1500、6 sets 10"-CL1500、1 sets 4"-CL1500、2 sets 16"-CL300、1 set 3"-CL900.
交货期Delivery Schedule:
境内货物：合同签订后44周（货到项目现场时间）
For goods within the PRC customs territory：within 44 weeks after signing the contract (arrival date to the jobsite).
境外货物: 合同签订后40周（提单发货时间）
For goods outside the PRC customs territory: within 40 weeks after signing the contract (departure date on the Bill of Lading).
交货地点Destination of delivery：
境内货物：浙江省宁波市北仑区白峰镇白中线峙北段368号
For goods within the PRC customs territory: No. 368, North Section of Baizhong Line, Baifeng Town, Beilun District, Ningbo City, Zhejiang Province.
境外货物：CIF中国浙江宁波港
For goods outside the PRC customs territory: CIF Ningbo Seaport, Zhejiang, P. R. China
2.对投标人的资格、业绩及证书要求：
Requirements for Qualification，reference and Classification of Bidder:
（1）资格要求
Requirements for Qualification of Bidder
从中华人民共和国关境内制造的货物：投标人只能为投标设备的制造商。
For goods manufactured within PRC customs territory: Bidders can only be the manufacturers of the bidding equipment.
从中华人民共和国关境外制造的货物：投标人可为投标设备的制造商或授权代理商。
For goods manufactured outside PRC customs territory:Bidders can be the manufacturers or Authorized Agents of the bidding equipment.
如果投标人是授权代理商，必须满足以下条件：
The bidder shall be the manufacturer or authorized agent of the bidded goods. If the bidder is the authorized agent, the following requirements must be met:
代理商应提供制造商同意其在本次投标中提供该货物的正式授权书。
The agent shall provide the Letter of Authority from manufacturer to agree to bid the goods in this Bid (see Form-IV-9-4 in Volum One).
如果投标人为境内注册公司，需提供有效的营业执照（具备独立法人资格）复印件，并加盖公章（以上证明文件在年审有效期内）。
如果投标人为境外注册公司，需提供有效的公司登记注册证明。
If the Bidder is domestic registered company, photocopies with Bidder’s official seal of valid business license shall be provided (such document within the validity period);
If the bidder is an overseas registered company, it shall provide valid company registration certificate.
投标人应提供阀门制造商以下两类有效认证证书复印件，所有证书认证的制造商名称应与其所提供业绩的制造商、此次投标货物的制造商一致。
The bidder shall provide copies of the two type certifications of the manufacturer when bidding. And the name of the certificates shall be the same with the manufacture of References and the manufacture of the bidding Goods.
① 国内制造商应具有TS证书（特种设备制造许可证）和覆盖投标产品范围的TSX证书（特种设备型式试验证书）。国外制造商应提供覆盖投标产品范围的TSX证书（特种设备型式试验证书），并在投标时提供承诺函，承诺内容为：供货前提供阀门原产地证明和2024年5月31日前提供TS证书（特种设备制造许可证）。
Domestic manufacturers should have TS Certificate (special equipment manufacturing license) and TSX Certificate (special equipment type test certificate) covering the scope of bidding products.Foreign manufacturers should provide a TSX certificate (Special Equipment Type Test Certificate) covering the scope of bidding products, and provide a commitment letter while bidding,which promises that provide a certificate of valve origin before supply, and a TS certificate (Special Equipment Manufacturing License) by May 31, 2024.
② 制造商应具有国际或国内认证机构颁发的覆盖投标产品范围的API607 或 API6FA 或 ISO10497 或同等标准的防火证书，并附相应的测试报告。
The manufacturer of compulsory inspection certificate shall have the fire prevention certificate of API 607 or API 6FA or ISO 10497 or equivalent standards covering the scope of bidding products issued by international or domestic certification institutions, and attach the corresponding test report.
（2）业绩要求：
Requirement for Bidder’s reference:
2010年1月1日起至投标截止日（以合同签署时间为准），投标人所投产品应在中国境内具有LNG接收站或具有接收站性质的（即满足GB51156-2015液化天然气接收站工程设计规范）调峰站项目(需提供满足GB51156-2015液化天然气接收站工程设计规范2.0.2液化天然气接收站:对船运液化天然气进行接收、储存、气化和外输等作业的场站要素的证明材料,证明材料通过国家发改委、省级发改委、政府网站、项目业主官网等官方网站查询，以加盖公章的截图形式提供。）的供货业绩，1个供货业绩中至少含有2台14寸及以上且≥CL1500的低温轴流式止回阀。
From January 1, 2010 to the bidding deadline (based on the signing date of the contract), The bidder's product should have a LNG receiving station or a peak shaving station project with a receiving station nature within China (i.e. meeting the GB51156-2015 Liquefied Natural Gas Receiving Station Engineering Design Specification) (Proof materials must be provided to meet the requirements of GB51156-2015 Code for Design of Liquefied Natural Gas Receiving Stations 2.0.2 Liquefied Natural Gas Receiving Stations: Station elements for receiving, storing, gasifying, and exporting liquefied natural gas transported by ships, the documents were obtained from the National Development and Reform Commission, the Provincial Development and Reform Commission, the government website, the project owner's website and other official websites, and provided to the tenderers in the form of screenshots stamped with official seals.) supply performance, one supply performance includes at least 2 sets low-temperature axial flow check valves of 14 inches and above and ≥ CL1500.
投标人须按规定格式提交业绩表，并提交相关业绩证明文件。业绩证明文件同时具有以下2种：
1）销售合同【或】销售订单【框架协议下订单（需提供主框架协议）或单个供货合同】复印件（含相关技术附件）和
2）到货验收材料。
投标人所提交的业绩证明文件必须至少体现以下内容：合同签署时间、货物名称、项目名称、供货数量、规格型号（口径及磅级）、制造商名称、到货验收材料。如提供的是调峰站业绩，投标人还需提供调峰站（满足GB51156-2015液化天然气接收站工程设计规范2.0.2液化天然气接收站：对船运液化天然气进行接收、储存、气化和外输等作业的场站)要素的证明材料，证明材料通过国家发改委、省级发改委、政府网站、项目业主官网等官方网站查询，以加盖公章的截图形式提供。未提交业绩证明文件，或所提供的业绩证明文件未体现上述信息的，均视为无效业绩。本次投标产品的规格型号(口径及磅级)、制造商名称必须与上述业绩的产品一致。
Bidders must submit the performance form in the prescribed format and submit relevant performance certification documents. The performance certification documents have the following two types at the same time:
1) Copy of sales contract [or] sales order [under framework agreement (main framework agreement required) or individual supply contract] (including relevant technical attachments) and
2) Acceptance materials upon arrival.
The performance proof documents submitted by the bidder must at least reflect the following contents: contract signing time, goods name, project name, supply quantity, specifications and models (caliber and pound level), the name of the origin and manufacturer, arrival acceptance materials .If the performance of the peak shaving station is provided, the tenderer also needs to provide proof materials that the peak shaving station meets the requirements of GB51156-2015 Design Specification for Liquefied Natural Gas Receiving Station Engineering 2.0.2 Liquefied Natural Gas Receiving Station (a station for receiving, storing, gasifying, and exporting liquefied natural gas transported by ships), the documents were obtained from the National Development and Reform Commission, the Provincial Development and Reform Commission, the government website, the project owner's website and other official websites, and provided to the tenderers in the form of screenshots stamped with official seals.Failure to submit performance certification documents, or performance certification documents provided that do not reflect the above information, shall be deemed invalid performance. The specifications and models(caliber and pound level), and the name of the origin and manufacturer of the bidding products must be consistent with the products with the above performance.
3. 有兴趣的投标人可通过以下方式获取招标文件：从2023年10月13日开始至2023年10月20日止，请登录中国海洋石油总公司采办业务管理与交易系统（）的招标公告页面进行购买。首次登录必须先进行注册，注册成功后，方可购买招标文件。购买过程必须全程在线操作，线下形式的汇款将不予接受。标书费支付成功后，投标人可自行下载招标文件。
本招标项目仅供正式会员查看，您的权限不能浏览详细信息,请注册本网会员并成为正式会员后可下载详细的招标公告、报名表格、项目附件和部分项目招标文件等。
联系人：陈经理
手机：13611390867
电话：010-89940160
邮箱：kefu@dljczb.com
QQ：2830892928
电力集采招标网会员协议下载
京公网安备 11010202009930
